Gillespie’s Material Lifts or Vertical Reciprocating Conveyors (VRC) are convenient low cost alternatives to elevators. They are designed for moving any material, palletized loads or freight to other building levels (to a mezzanine, etc.) both inside and outdoors. VRC's are not allowed to carry riders.

Easy to install, costing a fraction of cost of an elevator while accomplishing the same job. Our VRC's can be designed so no shaft or reinforced floors are required – ideal for older buildings. We have four basic models - see examples of each by clicking on the link to the right.

Complies with ANSI/ASME B20.1 and OSHA.

Features:

  • Standard and custom models available
  • Platforms of any size or capacity to suit every need
  • Two, three or four side access
  • Minimal hoistway / footprint required
  • Instantaneous safeties
  • Minimal building loads-design transmits loads to floor
  • Complies with ANSI/ASME B20.1 and OSHA
  • GENERAL INFORMATION

    :: EXAMPLES OF ALL 4 MODELS

    OVERHEAD HOIST: PWE-H

    :: 3' X 3', 500# CAPACTY
    :: 4' X 4', 1,000# CAPACTY
    :: 5' X 5', 1,000# CAPACTY
    :: 5' X 5', 2,500# CAPACTY
    :: 5' X 5', 10,000# CAPACTY
    :: 7' X 7', 8,000# CAPACTY
    DRUM MACHINE: PWE-1
    :: 6' X 4', 2,500# CAPACTY
    MINIMUM OVERHEAD: PWE-HBG

    :: 5' X 4', 1,000# CAPACTY

    :: 5' X 5', 1,000# CAPACTY

    :: 5' X 5', 2,500# CAPACTY
    FOUR SIDE ACCESS: PWE-HCP
    :: 10' X 4', 3,000# CAPACTY

    PLEASE NOTE: If you cannot find the information you require,or need additional information, please call us at 413/967-4980, e-mail us at sales@gillespiecorp.com or click on CONTACT US above at the uppermost right hand corner, fill out the form and send it to us.